3D modely ART

Filzhelm (Felt) Pickelhaube at The Imperial War Museum, London

velikost souboru - 23MB

stáhnout soubor 3D vizualizace

The Pickelhaube was a spiked helmet worn in the nineteenth and twentieth centuries by German military, firefighters, and police. Although typically associated with the Prussian army, the helmet was widely imitated by other armies during this period.
In Aug 1914 the declaration of war resulted in the mobilization of the armies of the German-speaking contingents fighting together as the Imperial German Army. With mobilization for a modern war, the German Armies found themselves unable to quickly equip millions of soldiers. A shortage of cow hide from Argentina combined with the excessive draw upon German industry to outfit the massive army being mobilized, resulted in a severe shortage of leather for manufacturing Pickelhauben. To meet with this immediate shortage, the Germans began in 1914 manufacturing helmets from Ersatz (substitute) materials.
Ersatz felt Pickelhaube were initially manufactured in 1914 with identical fittings in silver or brass as the M1895 Pickelhaube, with front visor trim, rear spine, etc. As the Filzhelm Pickelhaube was constructed from pressed and blocked rabbit felt, it afforded no practical head protection. The liner is manufactured similar to a standard leather Pickelhaube but sewn into the shell. Filzhelme are usually found pressed from one piece, but occasionally with separately sewn on felt visors. The liners in Ersatz Filzhelms are set up slightly different than regular leather Pickelhauben;. on an Ersatz Filzhelm, the liner is stitched inside the shell and then only folded once to get it inside the helmet. On a leather Pickelhaube, the liner is stitched inside-out on the outside of the shell then folded down and inward to the inside the helmet.
This helmet was made after the German Saxon Pickelhaube (Also uploaded on Scan The World) due to the blocked shipping of leather and wax from the North Sea after World War 1.

náhodný výběr modelů

Belle Matejka in Caransebes, Romania

Bodhisattva under an Eight Headed Naga at The Art Institute of Chicago, Illinois

Crouching Lion at The British Museum, London

Bull at The Middelheim Museum, Antwerp

Sir Henry Montgommery Laurence at The National Portrait Gallery, London

King George IV Equestrian Sculpture at Trafalgar Square, London

home technologie 3D tisku 3D tiskarny materiály 3D scanery 3D modely ART 3D programy 3D Slicer Reklama 3D tiskárny AONN.cz Spřátelené Weby		3D modely ART Filzhelm (Felt) Pickelhaube at The Imperial War Museum, London velikost souboru - 23MB stáhnout soubor 3D vizualizace The Pickelhaube was a spiked helmet worn in the nineteenth and twentieth centuries by German military, firefighters, and police. Although typically associated with the Prussian army, the helmet was widely imitated by other armies during this period. In Aug 1914 the declaration of war resulted in the mobilization of the armies of the German-speaking contingents fighting together as the Imperial German Army. With mobilization for a modern war, the German Armies found themselves unable to quickly equip millions of soldiers. A shortage of cow hide from Argentina combined with the excessive draw upon German industry to outfit the massive army being mobilized, resulted in a severe shortage of leather for manufacturing Pickelhauben. To meet with this immediate shortage, the Germans began in 1914 manufacturing helmets from Ersatz (substitute) materials. Ersatz felt Pickelhaube were initially manufactured in 1914 with identical fittings in silver or brass as the M1895 Pickelhaube, with front visor trim, rear spine, etc. As the Filzhelm Pickelhaube was constructed from pressed and blocked rabbit felt, it afforded no practical head protection. The liner is manufactured similar to a standard leather Pickelhaube but sewn into the shell. Filzhelme are usually found pressed from one piece, but occasionally with separately sewn on felt visors. The liners in Ersatz Filzhelms are set up slightly different than regular leather Pickelhauben;. on an Ersatz Filzhelm, the liner is stitched inside the shell and then only folded once to get it inside the helmet. On a leather Pickelhaube, the liner is stitched inside-out on the outside of the shell then folded down and inward to the inside the helmet. This helmet was made after the German Saxon Pickelhaube (Also uploaded on Scan The World) due to the blocked shipping of leather and wax from the North Sea after World War 1. náhodný výběr modelů Belle Matejka in Caransebes, Romania Bodhisattva under an Eight Headed Naga at The Art Institute of Chicago, Illinois Crouching Lion at The British Museum, London Bull at The Middelheim Museum, Antwerp Sir Henry Montgommery Laurence at The National Portrait Gallery, London King George IV Equestrian Sculpture at Trafalgar Square, London
©Ofrii 2012